We 3D scan your parts to reverse engineer them if required. We have a strong expertise in any type of reverse engineering from a simple part up to a complete engine.

Our team is using Catia V5 and/or Soliworks to design your CAD models and generate your G-Code if required.

We can cut any kind of sheet metal with our Water Jet and/or Shear (10 ga) and use our equipment and form your material in the shape required for your project. We have a 900 tons Bisboro Hydraulic Press, Power Hammer, Shrinker/Stretcher, English Wheel, Plannishing hammer ...

We are manufacturing parts for the Aerospace industry leveraging 3, 4 and 5 axis equipment.

We are cutting, forming, grinding, polishing and TIG welding chassis, tooling, exhausts per your specifications.

We are designing and manufacturing tooling such as jigs for sheet metal fabrication, dies for stamping and rubber pad forming, form blocks for stretch forming or spinning ... these are just few areas where we have been involved.

Our last project was to reverse engineer a set of camshaft covers for a V12 inverted engine. We scanned an original part, designed the CAD and then generated the molds required for this job. Once we the casting made, we did all finishing operations including surfacing, drilling and threading.

We are fabricating and assembling sheet metal together.