4 Flute-Long Length-Single End-Square-Uncoated 1 X 1 X 2-1/4 X 5

HTC

4 Flute-Long Length-Single End-Square-Uncoated 1 X 1 X 2-1/4 X 5

4 Flute-Long Length-Single End-Square-Uncoated 1 X 1 X 2-1/4 X 5
HTC Series 150 Solid Carbide End Mills Long Single End Square 2-4 Flute Uncoated

Specifications

More Information
Manufacturer Part Number 150-4100
Shank Diameter 1
Material Carbide
Cut Diameter 1
Coating BRITE
Overall Length 5
Mill End Type Square
Mill End Type Square End
Flutes 4
Length Of Cut 2-1/4
Length Of Cut 2-1/4
Manufacturer HTC

Price

$139.73
Proceed to checkout
Lead times may vary. Ships directly from vendor
More from HTC
  1. HTC 3-Flute SE 30°H CC 2° TAPER CRB    (V = TiN-V) 5/64 X 1/8 X 1/2 X 2-1/2
    HTC 3-Flute SE 30°H CC 2° TAPER CRB (V = TiN-V) 5/64 X 1/8 X 1/2 X 2-1/2
    $38.73
  2. HTC 4-Flute SE 30°H CC REG ROUGH COB    (HTC USA MFG) 5/8 X 5/8 X 1-5/8 X 3-3/4
    HTC 4-Flute SE 30°H CC REG ROUGH COB (HTC USA MFG) 5/8 X 5/8 X 1-5/8 X 3-3/4
    $31.49
  3. HTC 4-Flute SE 30°H NC LONG RHC/LHS HSS    (V = TiN-V) 7/16 X 1/2 X 1-3/8 X 3-3/4
    HTC 4-Flute SE 30°H NC LONG RHC/LHS HSS (V = TiN-V) 7/16 X 1/2 X 1-3/8 X 3-3/4
    $27.98
  4. HTC 4-Flute DE 30°H NC REG COB    (HTC USA MFG) 23/64 X 3/8 X 3/4 X 3-1/2
    HTC 4-Flute DE 30°H NC REG COB (HTC USA MFG) 23/64 X 3/8 X 3/4 X 3-1/2
    $15.98
  5. 4 Flute-Stub Length-Double End-Ball-TiN 3/16 X 3/8 X 5/16 X 2
    4 Flute-Stub Length-Double End-Ball-TiN 3/16 X 3/8 X 5/16 X 2
    $13.81