4 Flute-Long Length-Single End-Square-Uncoated 3/8 X 3/8 X 1-1/8 X 3

HTC

4 Flute-Long Length-Single End-Square-Uncoated 3/8 X 3/8 X 1-1/8 X 3

4 Flute-Long Length-Single End-Square-Uncoated 3/8 X 3/8 X 1-1/8 X 3
HTC Series 150 Solid Carbide End Mills Long Single End Square 2-4 Flute Uncoated

Specifications

More Information
Manufacturer Part Number 150-4375
Shank Diameter 3/8
Material Carbide
Cut Diameter 3/8
Coating BRITE
Overall Length 3
Mill End Type Square
Mill End Type Square End
Flutes 4
Length Of Cut 1-1/8
Length Of Cut 1-1/8
Manufacturer HTC

Price

$20.55
Proceed to checkout
Lead times may vary. Ships directly from vendor
More from HTC
  1. HTC 4-Flute SE 30°H CC LONG COB    (CN = TiCN-PG) 5/8 X 5/8 X 2-1/2 X 4-5/8
    HTC 4-Flute SE 30°H CC LONG COB (CN = TiCN-PG) 5/8 X 5/8 X 2-1/2 X 4-5/8
    $35.50
  2. 2 Flute-Standard Length-Single End-Ball-TiCN 53/64 X 7/8 X 1-1/2 X 4
    2 Flute-Standard Length-Single End-Ball-TiCN 53/64 X 7/8 X 1-1/2 X 4
    $170.93
  3. HTC 4-Flute SE 30°H CC LONG HSS    (HTC USA MFG) 1/2 X 1/2 X 2 X 4
    HTC 4-Flute SE 30°H CC LONG HSS (HTC USA MFG) 1/2 X 1/2 X 2 X 4
    $16.18
  4. HTC 3-Flute SE 30°H CC 2° TAPER  HSS    (LN = TiAlN-HC) 3/32 X 3/8 X 1/2 X 2-1/2
    HTC 3-Flute SE 30°H CC 2° TAPER HSS (LN = TiAlN-HC) 3/32 X 3/8 X 1/2 X 2-1/2
    $21.96
  5. HTC 2-Flute SE 30°H CC REG METRIC HSS    (CN = TiCN-PG) 8MM X 3/8 X 9/16 X 2-5/16
    HTC 2-Flute SE 30°H CC REG METRIC HSS (CN = TiCN-PG) 8MM X 3/8 X 9/16 X 2-5/16
    $13.29